How to use and wear Rexton hearing aids

1. Hold the hearing aid
   
   Grasp the body of the hearing aid with the speakers and wires/tubes facing downwards.
   
   
2. Position
   
   Align the speaker or earmold at the entrance of your ear canal.
   
   
3. Insert and fit
   
   Gently push the earmold or speaker into your ear canal.
   
   Ensure it's snug and comfortable.
   
   Tuck any over-the-ear components behind your ear.

1. Reach behind your ear (if you have a BTE or RIC) and grasp the body of the hearing aid.
   ​
2. Remove the hearing aid by gently pulling the earmold or speaker out of your ear canal.
   
   

Turning your Rexton hearing aids on and off depends on the model and whether it uses disposable batteries or a rechargeable battery. Follow the instructions for your hearing aid type.

How to Turn On Rexton Hearing Aids

For hearing aids with disposable batteries:

• Make sure the battery is inserted correctly.

• Close the battery compartment completely.

• The hearing aid should turn on automatically.

For rechargeable Rexton hearing aids:

• Many rechargeable Rexton hearing aids turn on automatically when removed from their charger. Some models can also be switched on using a button on the hearing aid. Check your model's user manual for the correct method.

How to Turn Off Rexton Hearing Aids

For hearing aids with disposable batteries:

• Locate the battery compartment.

• Open the compartment slightly to disconnect the battery.

• Leave the compartment open when the hearing aid is not in use.

For rechargeable Rexton hearing aids:

• Many rechargeable models turn off automatically when placed in a powered charger. Some models also allow you to turn them off by pressing and holding a button. Refer to your hearing aid's user manual for specific instructions.

Tip: If your Rexton hearing aids do not turn on, check the battery or charging status and make sure the hearing aids are clean and dry. If the problem continues, contact your Hearing Care Professional for assistance.

If your Rexton hearing aids are not responding, producing sound, or working as expected, restarting them may help resolve a temporary issue.

How to Restart Rexton Hearing Aids

For hearing aids with disposable batteries:

• Open the battery compartment to turn off the hearing aid.

• Wait approximately 30 seconds.

• Close the battery compartment to turn the hearing aid back on.

• Check whether the hearing aid is working normally.

For rechargeable Rexton hearing aids:

• The restart procedure depends on your specific model. Some hearing aids can be restarted using their control buttons, while others may restart when placed in and removed from the charger. Refer to your model's user manual for the correct instructions.

How to Reset Rexton Hearing Aids

• Restarting a hearing aid is not the same as resetting its settings. If your hearing aid continues to malfunction, consult your model's user manual or contact your Hearing Care Professional before attempting additional reset procedures.

Tip: Before requesting assistance, check whether the hearing aid is charged, clean, and free of visible debris. These simple checks can help identify common causes of sound or performance problems.

You can adjust the volume of your Rexton hearing aids using the controls on the devices, a compatible remote control, or a smartphone app, depending on your hearing aid model.

Adjusting Volume Using Hearing Aid Buttons

• Some Rexton hearing aids have built-in buttons or rocker switches that can be used to adjust the volume.

• Locate the control button or switch on your hearing aid.

• Use the assigned volume-up control to increase the sound.

• Use the assigned volume-down control to decrease the sound.

• Make small adjustments until the sound feels comfortable.

• The button functions may vary depending on your model and how your Hearing Care Professional has programmed the hearing aids.

Adjusting Volume Using the Rexton App

• If your hearing aids are compatible with the Rexton app, you may be able to adjust the volume directly from your smartphone.

• Open the Rexton app on your smartphone.

• Make sure your hearing aids are connected.

• Locate the volume control.

• Adjust the volume to your preferred listening level

• Some compatible models also support volume adjustments through a Rexton remote control.

If your hearing aids sound consistently too loud or too quiet, contact your Hearing Care Professional. They can review your settings and make adjustments to improve your listening experience.

1. Prepare the charger 
   
   Ensure the charging contacts on both the Rexton hearing aids and the charger are clean.
   
   
2. Place the aids in the charger
   
   Insert the hearing aids according to the charger’s compartments ensuring proper contact.
   
   
3. Connect to power
   
   Plug the charger into an electrical outlet. Indicator lights will typically show when the aids are charging and when they're fully charged.

Looking for instructions for your specific Rexton hearing aid model? Your user manual provides detailed guidance on how to turn your hearing aids on and off, adjust the volume, charge your devices, and troubleshoot common issues.

Because features and controls vary between models, it's important to follow the instructions for your specific hearing aids.

To find the correct Rexton hearing aid manual:

1. Identify your Rexton hearing aid model.
2. Visit the official Rexton website and look for product support or user manuals.
3. Find the instructions for your specific model.
4. Follow the manufacturer's guidance for using and maintaining your hearing aids.

If you're unsure which model you have or need help understanding the instructions, a HearUSA Hearing Care Professional can assist you.