How to connect and pair Signia hearing aids

Steps to enter pairing mode:

1. Turn on Bluetooth
   
   On your smartphone or device, enable Bluetooth in the settings menu.
   
   
2. Put hearing aids in pairing mode
   
   Battery models: Open and close the battery compartment to turn them on, wait 5-10 seconds until you hear the start-up indicator and/or see a light flash.
   
   Rechargeable models: Place in charger for 10 seconds, remove and wait 5-10 seconds until you hear the start-up indicator and/or see a light flash. Manual restart for rechargeable HAs: press and hold the button for 3-5 seconds to shut off, wait 5 seconds, press and hold button for 5 seconds and wait 5-10 seconds until you hear the start-up indicator and/or see a light flash.
   
   
3. Select the hearing aids
   
   On your device, look for the hearing aids in the list of available Bluetooth devices and select them to pair.

This method should establish a connection between your Signia hearing aids and your device, allowing for audio streaming and settings adjustments via Bluetooth.

Some hearing aids can connect to a TV directly via Bluetooth so you can connect to the TV's sound system and send the audio to the hearing aids. See Bluetooth connection instructions above.

For some TVs, you may need an additional device called a streamer, which Signia often refers to as a "TV transmitter" or "TV connector."

Here's how to set it up:

1. Connect the streamer to your TV
   
   Locate the audio output on your TV—this could be an optical, coaxial, or analog (RCA) output.
   
   Connect the appropriate cable from the TV's output to the streamer.
   
   
2. Power the streamer
   
   Plug the streamer into a power source using the provided adapter.
   
   
3. Pair the streamer with your hearing aids 
   
   Restart your hearing aids and put them close to the streamer.
   
   Depending on the model, you may need to activate pairing mode on the streamer by pressing a pairing button.
   
   Refer to the streamer's manual for specific instructions.
   
   
4. Select the correct TV audio output 
   
   On your TV settings, ensure the correct audio output is selected, matching the port used to connect to the streamer.
   
   
5. Test the connection
   
   Play something on the TV to check if the sound is transmitting to your hearing aids. Adjust the volume as necessary.

Connecting Signia hearing aids to a phone involves a few steps, generally using Bluetooth technology.

Here's how to do it:

1. Enable Bluetooth on your phone
   
   Go to your phone's settings, find the Bluetooth settings, and turn Bluetooth on.
   
   
2. Put your hearing aids in pairing mode
   
   Battery models: Open and close the battery compartment to turn them on, then press and hold the hearing aid button until you hear a beep or see a flashing light, indicating pairing mode.
   
   Rechargeable models: Turn them on with the power button and hold the button until you hear a beep or see a flashing light.
   
   
3. Pair with your phone
   
   On your phone, open the Bluetooth settings screen.
   
   You should see the hearing aids listed under available devices.
   
   Tap on your hearing aids in the list to pair them.
   
   You may need to confirm the pairing on your phone.

Follow these steps for connecting your hearing aids to your laptop or computer:

1. Enable Bluetooth
   
   Turn on Bluetooth in the system settings of your laptop or computer.
   
   
2. Set to pairing mode
   
   Battery models: Open and close the battery compartment to power on, then long press the button to enter pairing mode.
   
   Rechargeable models: Long press the power button until it enters pairing mode.
   
   
3. Select the hearing aids on your device
   
   Choose your hearing aids from the list of Bluetooth devices on your computer and pair them.
   
   This will allow you to connect your Signia hearing aids directly to your laptop or computer to stream audio.